top of page

6 Brand New Sealed 12 Ounce Bottles of Wilwood DOT 5.1 HI-TEMP 570 Racing Brake Fluid (WILWOOD #290-2210).

 

A high boiling point is only the beginning. The low viscosity of the new DOT 5.1 rated formula lets the modern car’s ABS, electronic stability control systems, and brake-based limited-slip systems react faster. It also makes bleeding the brakes quicker and easier. Hi-Temp 570 also improves resistance to aeration and foaming, which lead to bubble formation. No bubbles means improved pedal feel in severe use!

 

Convenient 12-ounce bottles, hermetically sealed bottles to prevent moisture absorption. Open containers should be used right away or stored only for short periods of time with a secure cap and an air-tight zip-top or heat-sealed vacuum bag.

 

FEATURES:

  • Wilwood’s 570 is now a DOT 5.1 rated brake fluid
  • Maintains its 570° F dry boiling point
  • Lower viscosity makes bleeding easier
  • Resists aeration and foaming

 

NOTE: Only use fresh un-opened fluid. Once opened, use immediately. Do not store opened bottles or cans, or reuse old fluid.

 

Due to a high-performance brake system's extreme operating temperatures, standard parts' store brake fluid is not recommended. Never mix brake fluids of different DOT classifications.

 

Dry Boiling Point

  • Of critical importance is the brake fluid's dry boiling point - the temperature at which a brake fluid will boil in its virgin non-contaminated state. The minimum dry boiling point temperature is 401° F for DOT 3 fluid, and 446° F for DOT 4. All Wilwood brake fluids exceed these standards, with Hi-Temp° 570 rated at 570° F, EXP600 Plus rated at 626° F, and XR Race-Only at 645° F.

 

Wet Boiling Point

  • Moisture enters your brake system through condensation, weather, ambient humidity, or washing the exterior. Glycol based brake fluids are hygroscopic (they absorb moisture), and over time the boiling point is gradually reduced. The DOT 3 minimum wet (roughly 4% water absorbed) boiling point temperature is 284° F, DOT 4 is 311° F. All Wilwood brake fluids exceed these wet boiling standards, with Hi-Temp° 570 rated at 313° F, EXP600 Plus rated at 417° F, and XR Race-Only at 432° F.

 

DOT 5 Silicone Fluid

  • Silicone DOT5 fluid is often used in classics, show cars, and pre-ABS Harley-Davidson motorcycles to prevent corrosion. Silicone fluids have a neutral PH and do not attract moisture like DOT 3 and DOT 4 fluids and is paint-safe if spilled. However, DOT 5 is not compatible with glycol-based DOT 3, DOT 4, or DOT 5.1 fluids, and will turn to gel if mixed. Wilwood does not recommend using silicone-based DOT 5 fluid in racing applications because it is prone to aeration and foaming under normal braking conditions, providing a spongy brake feel.

 

Flushing

  • Whenever you add fresh fluid to your existing system, it immediately becomes contaminated, lowering the new fluid's boiling point. For maximum performance, use a high boiling point fluid and flush the system thoroughly. For street cars, flush and refill the fluid every year. For race or track driven cars it can be beneficial to change the fluid after every race weekend, especially after racing in the rain, severe temperature use, or brake fluid boiling.

 

Note: 

Wilwood Hi-Temp 570 racing brake fluid is DOT 5.1 rated and compatible with other DOT 3, DOT 4, and DOT 5.1 fluids. DO NOT USE WHERE SILICONE DOT 5 FLUID IS SPECIFIED.

Buying bulk not only saves you cash, but is perfect for flushing out the old unwanted fluid out of your braking system.

 

Download the complete instruction booklet for flushing out your old brake fluid HERE.

6 Bottles of Wilwood 290-2210 Hi-temp 570 Racing Brake Fluid,Dot 5.1

SKU: 290-2210
$89.99 Regular Price
$79.99Sale Price
  • Ideal for ABS and stability control equipped cars Wilwood Hi-Temp 570 racing brake fluid has been widely used in the extreme environment of auto racing for decades, and the improved DOT 5.1 rated formula is even better. It has been proven to work, lap after lap, with no loss of braking or increased pedal travel despite severe heat.

  • SHIPPING TIME: There is no faster shipping on the web. We will ship as soon as the payment is processed. All UPS orders that are placed by 5:30 Central, Monday-Friday, are shipped out same day. Any order placed after 5:30 Central, or on the weekend, will be shipped out the next business day. See how many business days you are from us, via U.P.S. If you have any questions feel free to email Josh@JRMPerformanceParts.com or call us at (479)779-1243 at any time day or night. We want you to have the parts as bad as we do!

bottom of page